Porsche 911 Carrera S / 4S 3.0 TT ECU Tuning – 9A2 Evo Optimized Performance | 992 2018–Present

This isn't a generic flash. Our 992 Carrera S and 4S 3.0 twin-turbo calibrations are developed in-house, optimized on the dyno, and tested on the street and track. Every map is built around your fuel, your hardware and how you actually drive the car — maximum power with factory-level refinement and reliability.

Estimated on a healthy car with known-good fuel:

• 444 hp → 529 hp — estimated gain of +85 hp
• 391 lb-ft → 431 lb-ft — estimated gain of +40 lb-ft
• Fuel maps available for 91, 93 and 100 octane
• Adjustable throttle response and boost timing
• Calibrated for consistent performance in all conditions

The 992 Carrera S and 4S run the 9A2 Evo 3.0L twin-turbocharged flat-six. Porsche sets the factory file conservatively on boost, ignition timing and fuelling to survive worst-case global fuel quality, and rewriting it for the fuel you actually run is worth 85 hp on stock hardware — enough to put a tuned Carrera S past a factory 991 Turbo. This calibration covers both the rear-wheel-drive S and the all-wheel-drive 4S.

What's included:

• Custom 9A2 Evo ECU calibration developed around your fuel, hardware and driving preference
• Optimized boost, ignition timing and fuelling for your specific car
• Throttle response and drivability refinement
• Fuel map matched to the octane you actually run — 91, 93 or 100
• OBDII data cable shipped to you
• Same-day file turnaround once we have your stock read

What we need from you:

• Your factory stock file, read with the cable we send you
• A complete list of current modifications
• Vehicle details and VIN
• An honest description of the car's mechanical condition and service history
• The octane you run day to day

Supported Vehicles:

• Porsche 911 Carrera S (992) — 3.0L twin-turbocharged flat-six, 9A2 Evo, rear-wheel drive, 2018 to current
• Porsche 911 Carrera 4S (992) — 3.0L twin-turbocharged flat-six, 9A2 Evo, all-wheel drive, 2018 to current

How to order:

• 1. Order online. We ship you an OBDII data cable — typically 2–3 days to arrive.
• 2. Read your stock file. Plug the cable into your OBD port, upload your factory file, then email it to us with a list of your current modifications.
• 3. Get your file back the same day. We email your custom calibration back the day we receive your stock read — and we'll make sure you're happy with it.

In the Southern California area? Get in touch and we can tune your car in person instead.

Before you order:

• Power figures are estimates, not guarantees. Results vary with fuel quality, altitude, ambient temperature, mechanical condition, supporting modifications and dyno methodology.
• Mechanical condition — tuning raises cylinder pressure and driveline load. The car must be sound first. Pre-existing faults revealed or accelerated by tuning are not our responsibility.
• Accurate information required — we build the file from what you tell us. An unmodified stock read and an honest description of the car, its modifications and its condition are required.
• Warranty — an ECU modification will likely void your factory powertrain warranty. On a car still inside its original warranty period, that is a real cost to weigh.
• Legal use — certain calibrations are for off-road and competition use only. Compliance with federal, state and local emissions law is the buyer's responsibility.
• Risk and liability — the customer assumes the risk of modification. Our liability is limited to the price of the tuning service.

Note: Tuning services are non-refundable once the file has been delivered. The service is complete at delivery. Full terms are on our Terms of Service page.

Questions about your specific car? Get in touch — we're happy to confirm the right calibration before you order.

FlatSixSpirit — Premium Porsche Performance Parts
Remote Delivery · Custom Calibration