Porsche Cayenne 958.2 - remote ECU tuning for the 3.6 V6, 2015 onward

Porsche Cayenne 3.6 V6 ECU Tuning – Optimized Performance | 958.2 2015–Present

$1,488.00
Skip to product information
Porsche Cayenne 958.2 - remote ECU tuning for the 3.6 V6, 2015 onward

Porsche Cayenne 3.6 V6 ECU Tuning – Optimized Performance | 958.2 2015–Present

$1,488.00

This isn't a generic flash. Our 958.2 Cayenne 3.6 V6 calibrations are developed in-house, optimized on the dyno, and tested on the street and track. Every map is built around your fuel, your hardware and how you actually drive the vehicle — maximum power with factory-level refinement and reliability.

Estimated on a healthy vehicle with known-good fuel:

  • 300 hp → 370 hp — estimated gain of +70 hp
  • 300 lb-ft → 370 lb-ft — estimated gain of +70 lb-ft
  • Fuel maps available for 91, 93 and 100 octane
  • Adjustable throttle response and boost timing
  • Calibrated for consistent performance in all conditions

The 958.2 Cayenne is the entry model of the facelift range, and Porsche calibrates it conservatively to protect the gap to the S above it. That leaves an unusual amount on the table for the base car: a matched +70 hp and +70 lb-ft, which is more than the Cayenne S gains. This is not the 2011–2015 naturally aspirated 3.6 — that earlier car takes a different file and responds very differently.

What's included:

  • Custom ECU calibration developed around your fuel, hardware and driving preference
  • Optimized boost, ignition timing and fuelling for your specific vehicle
  • Throttle response and drivability refinement
  • Fuel map matched to the octane you actually run — 91, 93 or 100
  • OBDII data cable shipped to you
  • Same-day file turnaround once we have your stock read

What we need from you:

  • Your factory stock file, read with the cable we send you
  • A complete list of current modifications
  • Vehicle details and VIN
  • An honest description of the vehicle's mechanical condition and service history
  • The octane you run day to day

Supported Vehicles:

  • Porsche Cayenne (958.2) — 3.6L V6, 2015 to current

How to order:

  • 1. Order online. We ship you an OBDII data cable — typically 2–3 days to arrive.
  • 2. Read your stock file. Plug the cable into your OBD port, upload your factory file, then email it to us with a list of your current modifications.
  • 3. Get your file back the same day. We email your custom calibration back the day we receive your stock read — and we'll make sure you're happy with it.

In the Southern California area? Get in touch and we can tune your vehicle in person instead.

Before you order:

  • Power figures are estimates, not guarantees. Results vary with fuel quality, altitude, ambient temperature, mechanical condition, supporting modifications and dyno methodology.
  • Mechanical condition — tuning raises cylinder pressure and driveline load. The vehicle must be sound first. Pre-existing faults revealed or accelerated by tuning are not our responsibility.
  • Accurate information required — we build the file from what you tell us. An unmodified stock read and an honest description of the vehicle, its modifications and its condition are required.
  • Warranty — an ECU modification will likely void any remaining factory powertrain warranty.
  • Legal use — certain calibrations are for off-road and competition use only. Compliance with federal, state and local emissions law is the buyer's responsibility.
  • Risk and liability — the customer assumes the risk of modification. Our liability is limited to the price of the tuning service.

Note: Tuning services are non-refundable once the file has been delivered. The service is complete at delivery. Full terms are on our Terms of Service page.

Questions about your specific vehicle? Get in touch — we're happy to confirm the right calibration before you order.

FlatSixSpirit — Premium Porsche Performance Parts
Remote Delivery · Custom Calibration

You may also like